Related Experiment Video
Updated: Jul 18, 2026

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves
Published on: October 17, 2013
Aerodynamic characteristics of tracheostomy speaking valves: an updated report
D J Zajac1, L Fornataro-Clerici, T A Roop
1University of North Carolina at Chapel Hill, 27599, USA. david_zajac@dentistry.unc.edu
Abstract:
Two analyses were conducted to define some aerodynamic properties of one-way speaking valves designed for use with the tracheotomized patient. In the first analysis, the resistance to airflow of six different valves was determined during steady-state flow testing at rates of .450, .500, and .550 I/s. Significant differences among the valves were established only at the lowest flow rate. All valves exhibited relatively low resistance in the range of nasal resistance reported for normal adults. In the second analysis, the aerodynamic integrity of the valves was assessed during repetition of the syllable /pa/ under a condition used to simulate tracheostomy speech production. Significant differences were found among the valves in terms of air loss occurring during the rise in pressure associated with the production of the consonant /p/. Valves with diaphragms open at atmospheric pressure consistently exhibited air loss. Average slope of the rise in pressure for one of the valves tested was significantly greater, suggesting increased work during speech production. The results of these analyses suggest that although the inspiratory resistance to airflow was similar among various one-way speaking valves, some valves exhibit air loss during speech production.
Related Concept Videos
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Tracheostomy Decannulation
Description of the Procedure
Decannulation refers to the permanent removal of the tracheostomy tube, signaling the resolution of the condition that initially necessitated the tracheostomy. The process requires a well-coordinated interplay between...
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask and...
Tracheostomy Suctioning II: Procedure

