Relationship between ruminal starch degradation and the physical characteristics of corn grain

The objectives of this study were to determine the range of variation in the rate and extent of in situ ruminal starch degradation of 14 corns differing in vitreousness and to predict ruminal starch degradability by physical characteristics of corn grains. This study was conducted with eight dent and six flint corns. Ruminal starch degradability was determined by an in situ technique on 3-mm ground grains. Physical characteristics of corn grain were measured: hardness by grinding energy and particle size distribution, apparent and true densities, and specific surface area. Ruminal DM and starch degradabilities averaged 50 and 55.1% and varied from 39.7 to 71.5% and from 40.6 to 77.6%, respectively. Ruminal starch degradability averaged 61.9 and 46.2% in dent and flint types, respectively. The proportion of coarse particles (61.9 vs. 69.6% for dent and flint, respectively), the apparent density (1.29 vs. 1.36 g/cm3 for dent and flint, respectively), and the specific surface area (.13 vs. .07 m2/g for dent and flint, respectively) varied with the vitreousness. Ruminal starch degradability could be predicted accurately by vitreousness (r2 = .89) or by the combination of apparent density and 1,000-grain weight (R2 = .91), a measurement faster than the vitreousness determination.