Bead compacts. II. Evaluation of rapidly disintegrating nonsegregating compressed bead formulations

In this study, three techniques for the prevention or mitigation of polymer coat fracture on compaction of sustained-release beads into tablets were investigated. All techniques in this paper were evaluated without the addition of any cushioning excipients, but rather by spray coating these excipients to avoid segregation during product manufacturing. First, it was shown that use of swellable polymers such as polyethylene oxide (PEO) serves a unique and effective role in preventing polymer coat rupture. PEO was spray coated between the ethylcellulose (EC) and microcrystalline cellulose (MCC) coats to evaluate its cushioning effect. The compacted PEO layered beads, on dissolution, disintegrated into individual beads with sustained drug release of up to 8 hr. It is postulated that the PEO was hydrated and formed a gel that acts as a sealant for the cracks formed in the ruptured polymer coating (sealant-effect compacts). Second, EC-coated drug-layered beads were also overcoated with cushioning excipients such as polyethylene glycol (PEG) and MCC with an additional coating of a disintegrant. These beads were compressed at pressures of 125, 500, and 1000 pounds into caplets and, on dissolution testing, disintegrated into individual beads when the dissolution medium was switched from simulated gastric to intestinal fluid. The dissolution profiles show that the polymer coat was partly disrupted on compaction, leading to a total drug release in 8-10 hr. Third, EC-coated beads were also granulated with cushioning excipient and compressed.