Chemical shift artifact-free microscopy: spectroscopic microimaging of the human skin

A spectroscopic imaging technique with high spatial resolution was used for the study of human skin in vivo. The measurements were performed using a whole-body magnetic resonance system (1.5 T) with standard gradients and a standard 8-cm diameter circular surface coil. A decisive gain in signal-to-noise ratio was achieved by reducing the receiver bandwidth of the imaging system to values less than +/-5 kHz. The chemical shift misregistration was eliminated by post-detection data processing. The method was tested on different kinds of skin, on the foot sole and head. Water, fat, and chemical shift artifact-free images were obtained with resolution 0.107 x 0.143 mm in plane and slice thickness 1 mm. A major advantage of the spectroscopic imaging procedure is that the pulse sequence can be optimized for the maximum signal-to-noise ratio. There is no need for special modification of the sequence to circumvent the chemical shift artifacts (water, fat suppression, etc.).