A study of ureteric peristalsis using a single catheter to record EMG, impedance, and pressure changes

Ureteric peristalsis transports a urinary bolus from the renal pelvis to the bladder. We developed an intraluminal catheter with a pressure transducer on it to study intraluminal pressure changes and a twin bipolar electrode to record the ureteric EMG and impedance (Z) changes during a peristaltic wave. Five female New Yorkshire pigs (50-60 kg) were studied under light halothane anesthesia (5% at induction/1% for maintenance). A steady state of hydration was maintained using intravenous saline infusion. EMG spike burst activity was studied at a 10-cm interval using low (0-30) Hz filters. Impedance between the same electrodes is measured simultaneously in higher frequencies (1-5 KHz) as a function of ureteric motor activity. Pressure generation in the ureteric lumen was also measured simultaneously by a transducer on the same catheter. A digital signal processing program (Poly 4.9) was used for analysis. Parenteral furosemide was used to induce diuresis. Resting ureteric impedance (Z(R)) decreases to Z(B) (Z bolus) during the passage of the urinary bolus. Passage of a contractile zone during a peristaltic wave increases impedance from Z(B) to its Z(R) level and initiates a pressure rise. Bolus length (the length Z(B)) is not constant and decreases distally. EMG corresponds well in time to impedance. Z(R) disappears after infusion of furosemide because of increased urine load and changes of intraluminal ionic environment. The contractile segment of a ureteric peristaltic wave appears to be represented by an elevated Z segment (Z(C)). Pressure rise is recorded only at the beginning of a contractile zone. A specially adapted intraluminal catheter can be used to study peristalsis in the upper urinary tract. One can study all the three components of ureteric peristalsis (excitation, contraction, and intraluminal pressure rise) using such a catheter.