Synthesis of superporous hydrogels: hydrogels with fast swelling and superabsorbent properties

We have been interested in the synthesis of hydrogels with fast swelling kinetics and superabsorbent properties. To increase the water absorption rate, interconnected pores were introduced to the hydrogels. Since the pore size in the dried hydrogels is in the order of hundreds of micrometers, these hydrogels are called "superporous" hydrogels. Superporous hydrogels were synthesized by crosslinking polymerization of various vinyl monomers in the presence of gas bubbles formed by the chemical reaction of acid and NaHCO3. The polymerization process was optimized to capture the gas bubbles inside the synthesized hydrogels. The use of the NaHCO3/acid system allowed easy control of timing for gelation and foam formation. We found that PF127 was the best foam stabilizer for most of the monomer systems used in our study. Scanning electron microscope (SEM) pictures showed interconnected pores forming capillary channels. The capillary channels, which were critical for fast swelling, were preserved during drying by dehydrating water-swollen hydrogels with ethanol before drying. The ethanol-dehydrated superporous hydrogels reached equilibrium swelling within minutes. The equilibrium swelling time could be reduced to less than a minute with the use of a wetting agent. In our study, water moisture was used as a wetting agent since the amount of moisture content in the dried hydrogels easily could be controlled. Preparation of superporous hydrogels using the right blowing system, foam stabilizer, drying method, and wetting agent makes it possible to reduce the swelling time to less than a minute regardless of the size of the dried gels. The superporous hydrogels can be used where fast swelling and superabsorbent properties are critical.