Microstructure of the solder-casting zone in bridges of dental gold alloys

The composition and structure were studied in the cast and in the solder of bridges which had failed clinically. Both materials were gold alloys but with different contents of Pt, Ag and Zn. The metallographic investigation revealed defects mostly in the solder, situated in the subsurface layer. SEM studied of the fracture surface revealed large porosites and a structure of dense parallel lines--striations--, indicating that the material had failed from fatigue. The materials in the fractured bridges were identified by micro-probe measurements. It was stated that cast material and solder material used together, were of different composition.