[Experimental and finite-element models for the assessment of mandibular deformation under mechanical loading]

Biomechanical investigations of the mandible are difficult to perform due to a variety of conditions involved. For the appropriate reconstruction of biomechanical properties, a geometrically correct body model has to be established which fits to complex in vivo conditions. The aim of our study was to evaluate the use of finite-element models (FEM) for the assessment of mandibular deformation under mechanical loading. Explanted human mandibles (n = 5) were investigated by strain gauges to determine the individual strain distribution under mechanical loading. FEM analysis based on a computed tomograph (CT) was performed and the results were matched with the test data. Our study demonstrates only minor interindividual differences in the strain distribution for each load studied. The mechanical response in terms of deformation was found to depend mainly on gross geometrical properties and to a minor extent on the various other variables. At all positions the maximum principal strain was tensile, the minimum principal strain was compressive, and the absolute strain values were correlated with the magnitude of the applied force. CT-based FEM analysis revealed the utility of mathematical models to approximate simulated data our experimental results. Hence, FEM analysis is a non-invasive tool in the prediction of biomechanical behaviour of individual mandibles and therefore may help in trauma reconstruction and treatment planning.