Simultaneous stopped-flow determination of butylated hydroxyanisole and propyl gallate using a T-format luminescence...

A simple and fast luminescent method is used for the first time to resolve a mixture of two synthetic antioxidants, propyl gallate (PG) and butylated hydroxyanisole (BHA), by the joint use of the stopped-flow mixing technique and a T-format luminescence spectrometer. The determination of these compounds involves two different and independent reactions. On the one hand, PG determination is based on an energy transfer process that involves the formation of a lanthanide chelate with terbium in the presence of Triton X-100 and tri-n-octylphosphine oxide. On the other hand, BHA is determined using a reaction between the oxidized form of Nile Blue and the antioxidant. Both systems are excited at the same excitation wavelength (310 nm), and the emission wavelengths are 545 and 665 nm for PG and BHA, respectively. The absence of overlap in the emission spectra makes it possible to measure separately the analytes in each channel of the instrument. Initial rate and equilibrium signal are used as analytical parameters and measured in 0.1 and 1 s for PG and BHA, respectively. Calibration graphs are linear over the range 0.09-3.5 microg mL(-)(1) for PG and 0.3-15 microg mL(-)(1) for BHA. The relative standard deviations of both systems are close to 2%. The proposed method is applied to the determination of these two antioxidants in several commercial food samples with recoveries ranging between 94.8 and 102.9% for PG and between 94.1 and 102.1% for BHA.