A field-portable plasma source monitor for real-time air particulate monitoring

In this research, a novel portable instrument for on-site, real-time air particulate monitoring was developed. It is highly desirable to use microwave plasmas for on-site, real-time environmental and occupational hazard monitoring because they can be sustained with various gases at relatively low power and possess excellent detection capabilities for both metal and nonmetal air pollutants. In the new instrument design, a microwave plasma was selected as an excitation source and was used in conjunction with atomic emission spectrometry. A small, integrated spectrometer with a charge-coupled detector (CCD) was used for optical signal detection. An efficient, in situ air-sampling system was developed for direct sampling of air particles into the plasma. Characterization and calibration of the new instrument were achieved with an in-house-fabricated high-efficiency nebulization-desolvation system. Tolerance of the microwave argon plasma source to air introduction was tested, and the operational parameters were optimized. Analytical performance and the feasibility of the newly developed portable instrument for aerosol particle analysis were evaluated. Some advantages and possible applications of the new instrument are discussed. The instrument provides an innovative tool for rapid environmental and occupational hazard monitoring.