Optimization of simultaneous saccharification and fermentation for the production of ethanol from lignocellulosic...

Simultaneous saccharification and fermentation (SSF) of alkaline hydrogen peroxide pretreated Antigonum leptopus (Linn) leaves to ethanol was optimized using cellulase from Trichoderma reesei QM-9414 (Celluclast from Novo) and Saccharomyces cerevisiae NRRL-Y-132 cells. Response surface methodology (RSM) and a three-level four-variable design were employed to evaluate the effects of SSF process variables such as cellulase concentration (20-100 FPU/g of substrate), substrate concentration (5-15% w/v), incubation time (24-72 h), and temperature (35-45 degrees C) on ethanol production efficiency. Cellulase and substrate concentrations were found to be the most significant variables. The optimum conditions arrived at are as follows: cellulase = 100 FPU/g of substrate, substrate = 15% (w/v), incubation time = 57.2 h, and temperature = 38.5 degrees C. At these conditions, the predicted ethanol yield was 3.02% (w/v) and the actual experimental value was 3.0% (w/v).