Isolation and quantification of dissolved lignin from natural waters using solid-phase extraction and GC/MS

Solid-phase extraction (SPE) was tested for the isolation of dissolved lignin from diverse natural waters (fresh, estuarine, and marine) in preparation for CuO oxidation. Capillary GC coupled to selected-ion monitoring mass spectrometry (SIM-MS) of CuO oxidation products provides the high sensitivity and precision required for the identification and quantification of trace levels of lignin in seawater. The low blanks and quick cleanup of C18 cartridges support SPE for processing such samples. Comparison of SPE with other isolation procedures (direct dry-down and ultrafiltration) has shown that this method quantitatively recovers dissolved lignin and preserves its compositional parameters. The concentration and nature of dissolved organic matter appear to be primary factors that constrain the amount of water that should be processed to obtain quantitative and reproducible recoveries of dissolved lignin using SPE. Highest recoveries of dissolved lignin were obtained at low pH (1.5-4.0) with substantial decreases at pH > 4. Extraction efficiencies were independent of flow rate within a range of five to fifteen bed volumes per minute (50-150 mL min(-1)), and both refrigeration and freezing were appropriate long-term storage methods for processed cartridges prior to elution of retained dissolved lignin.