Related Experiment Video
Updated: Aug 10, 2026

X-ray Dose Reduction through Adaptive Exposure in Fluoroscopic Imaging
Published on: September 11, 2011
Radiation dose and image information in computed radiography. A phantom study of angle measurements in the
J Sanfridsson1, G Holje, G Svahn
1Department of Diagnostic Radiology, University Hospital, Lund, Sweden.
Purpose:
To establish a correlation between radiation dose and diagnostic accuracy when employing a new digital method for angle determinations. The specific intention was to determine how far the radiation dose can be reduced without losing measuring accuracy and to compare this radiation dose with that employed with our conventional method.
Material And Methods:
An image succession of an anthropomorphic phantom was generated with a computed radiography (CR) system, by reducing the exposure stepwise. The images were archived and transferred to a workstation for evaluation. The intraobserver variation of two angle determinations was used as an indicator of the evaluation accuracy. Patient radiation doses were measured with thermoluminescent dosimeters. The energy imparted, indicating the relative risk associated with exposure to ionising radiation, and the effective dose, which determines the absolute risk, were calculated.
Results And Conclusion:
No significant correlation was found between patient dose and measuring accuracy within the evaluated exposure interval. At the lowest exposure of the CR system, the energy imparted to the patient was 30 microJ. Compared with our conventional analogue method this is a reduction by 98%. The effective dose was as low as 1.5 microSv. The CR technique creates possibilities to adapt exposure parameters, and thus the radiation dose to the patient, according to the purpose of the investigation.
Related Concept Videos
X-ray Imaging
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
Radiological Investigation I: X-ray and CT
Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
Imaging Studies for Cardiovascular System III: X-Ray
Definition and Purpose
An X-ray, or radiograph, is a non-invasive method that uses ionizing radiation to take images of internal structures. It is mainly used in cardiac imaging to examine the heart, lungs, and major blood vessels, aiming to identify abnormalities in the heart's size, shape, and position, such as heart failure, congenital defects, and vascular...
Imaging Studies III: Computed Tomography

