The radiographic quantitation of aortic valve calcification: implications for assessing bioprosthetic valve...

Calcification of natural aortic and bioprosthetic heart valves is a poorly understood phenomenon that results in valvular obstruction and tissue failure. We describe a non-destructive quantitative computed microtomographic (QCT) technique for determining both calcium content and local calcium distribution within explanted valves. As a reference standard, a dual-energy x-ray absorptiometry (DEXA) system with an accuracy demonstrated to be within 1% of the true calcium mass of test material was used to obtain the total calcium content of 24 human aortic valve cusps recovered at autopsy from patients aged 51-80 years. These cusps were then scanned using our unique volume QCT scanner, with multiple x-ray projections acquired by rotating the explanted tissue through a single axis of rotation. A three-dimensional cross-sectional map was reconstructed for each cusp. Voxel size was 0.003 mm3 and a calibration phantom was used to calculate calcium content. The minimum detection limit for calcium mass was 1 mg within the whole cusp. The DEXA and QCT scans were compared with respect to total calcium content, which ranged from 0 to 15 mg. An excellent correlation between the two independent techniques was demonstrated with an r2 value of 0.94 (p < 0.001). Non-destructive microtomographic CT scanning provided excellent volumetric density measurements, with quantitative 3D images permitting an assessment of any individual area of the cusp for calcium content and spatial distribution. This new approach to valve tissue analysis allows for subsequent histologic assessment.