Estimate of gas transfer rates of an intravascular membrane oxygenator

An asymmetric hollow fiber membrane was prepared from a newly synthesized fluorinated aromatic polyimide (6FDA-6FAP) by using a dry/wet phase inversion process. The membrane was used in a membrane oxygenator over a long period of time. In this study, the potential of the membrane for intravascular membrane oxygenation (IVOX) was studied in respect to oxygen transfer. The gas permeance of the membrane and three commercially available hollow fiber membranes for membrane oxygenators was measured in a gas-gas system and a gas-liquid system and discussed relative to the membrane structures. The oxygen transfer rates of the IVOX devices using these four membranes were estimated by a mathematical kinetic model, with the oxygen permeance measured in the gas-liquid system. The results showed that the device using the 6FDA-6FAP hollow fiber membrane has the highest oxygen transfer rate and is believed to be applicable to IVOX. The methods to determine oxygen transfer rate of a hollow fiber membrane and the mathematical kinetic model, are useful for developing a hollow fiber membrane and a device for oxygenation.