Flexural strength optimisation of a leucite reinforced glass ceramic

The aims of the study were to process a ceramic material with a fine leucite particle size using hot pressing techniques, to increase the flexural strength, reliability and ease of use.

A starting glass composition of wt%; 64.2% SiO(2), 16.1% Al(2)O(3), 10.9% K(2)O, 4.3% Na(2)O, 1.7% CaO, 0.5% LiO and 0.4% TiO(2) was used to produce a leucite reinforced ceramic material. Twenty-one porcelain discs were produced by sintering the ceramic frit (group 1) and sixty-three discs by heat pressing the frit (groups 2, 3 and 4). Twenty-one Empress 1 ceramic discs were also heat pressed (group 5). Disc specimens were tested using the biaxial flexure test at a crosshead speed of 0.15mm/min and the data analysed using the Scheffé F multiple comparison test and Weibull statistics. Specimens were characterised using X-ray diffraction (XRD), secondary electron imaging and energy dispersive X-ray analysis where applicable.

The heat pressed groups (2, 3 and 4) had higher mean biaxial flexural strengths and characteristic strength values than groups 1 and 5 (p<0.05). XRD revealed the presence of tetragonal leucite in all test groups. Fine leucite crystals, tabular platelets and minimal matrix microcracking were found in the microstructure of test groups (1-4) with a more uniform leucite distribution in the heat pressed specimen groups (2, 3 and 4), which were associated with a significant increase in the biaxial flexural strength and reliability.

Optimisation of the microstructure by producing a fine microstructure and controlling the distribution via the correct pressing parameters may be extremely advantageous in these systems.