Biosorption of reactive dyes by dried activated sludge: equilibrium and kinetic modelling
Related Experiment Videos
Aksu1
1Chemical Engineering Department, Hacettepe University, 06532 Beytepe, Ankara, Turkey
Biochemical Engineering Journal
|January 11, 2001
Abstract:
The biosorption of reactive dyes (Reactive Blue 2 - RB2 and Reactive Yellow 2 - RY2) onto dried activated sludge was investigated. The dye binding capacity of biosorbent was shown as a function of initial pH, initial dye concentration and type of dye. The equilibrium data fitted very well to both the Freundlich and Langmuir adsorption models. The results showed that both the dyes uptake processes followed the second-order rate expression.
Related Concept Videos
00:46Bioremediation
Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.
01:30Biological Treatment of Effluent and Waste Water
Biological wastewater treatment relies on the metabolic activity of microorganisms to remove pollutants from sewage. In modern treatment systems, this process is organized into sequential stages that progressively reduce solid material, dissolved organic matter, and microbial contamination. Each stage plays a distinct role in improving water quality and preparing the effluent for safe discharge or reuse.Primary and Secondary TreatmentPrimary treatment is a physical process that removes large...