Single-run capillary electrophoretic determination of inorganic nitrogen species in rainwater

A capillary electrophoretic (CE) method for the simultaneous determination of nitrate, nitrite, and ammonium ions has been developed. Direct (NO3-, NO2-) and indirect (NH4+) UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was used. The optimized separations were carried out in 10 mmol/L imidazole sulfate, 2 mmol/L 18-crown-6, and 0.02 mmol/L tetradecyltrimethylammonium hydroxide electrolyte (pH 4.0). The method permits excellent separation of three nitrogen species in only 4 min. A 1 x 10(-4) mol/L KBr solution was used as an internal standard to limit possible electrokinetic injection biases. Experimental results showed that the use of an anionic internal standard for cationic analytes and vice versa gives only slightly better precision than analysis with no internal standard. Using Br- internal standard for NO3- and NO2- ions and K+ for NH4+, peak area RSD values decrease significantly. The proposed system was applied to the speciation of inorganic nitrogen ions in rainwater samples. The recovery tests established for external calibration and standard addition techniques using one or two internal standards were within the range 100 +/- 10%. The CE results agree with those obtained by spectrophotometric methods.