Related Experiment Video
Updated: Aug 15, 2026

An Efficient Sample Preparation Method to Enhance Carbohydrate Ion Signals in Matrix-assisted Laser Desorption/Ionization Mass Spectrometry
Published on: July 29, 2018
An inductively coupled plasma carbon emission detector for aqueous carbohydrate separations by liquid chromatography
H L Peters1, K E Levine, B T Jones
1Department of Chemistry, Wake Forest University, Winston-Salem, North Carolina 27109, USA.
Abstract:
An inductively coupled plasma atomic emission spectrometer is used to detect carbon-containing compounds following separation by high-performance liquid chromatography. A calcium form ligand exchange column with distilled and deionized water as the mobile phase is used to separate carbohydrates. The eluting species are detected by monitoring the carbon atomic emission line at 193.09 nm. The mass detection limits using a photomultiplier tube for sucrose and glucose are 50 ng, while that for fructose is 60 ng. The carbon emission detector should provide the same detection limit for any compound with a similar mass percent of carbon, whether or not the compound exhibits appreciable absorption characteristics. While the carbon emission detector will universally detect any organic compound, it will discriminate against species with high molar absorptivity that may be present at low concentration. Such species may act as interferences in chromatograms generated with conventional UV-visible absorption detectors. To demonstrate the utility of the carbon emission detector, three sugars (glucose, fructose, sucrose) are determined in apple, crangrape, and orange juice.
More Related Videos
14:42Liquid Chromatography Coupled to Refractive Index or Mass Spectrometric Detection for Metabolite Profiling in Lysate-based Cell-free Systems
Published on: September 23, 2021
08:56Detection of Regulated Ergot Alkaloids in Food Matrices by Liquid Chromatography-Trapped Ion Mobility Spectrometry-Time-of-Flight Mass Spectrometry
Published on: November 22, 2024
Related Concept Videos
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
High-Performance Liquid Chromatography: Types of Detectors
Capillary Electrophoresis: Instrumentation
Capillary Electrophoresis: Applications
Capillary zone electrophoresis (CZE) separates ionic components based on their electrophoretic mobility. It has been used to separate proteins, amino acids,...