Bioaugmentation with resin-acid-degrading bacteria enhances resin acid removal in sequencing batch reactors treating...

Resin acids are the major toxicants in pulp and paper mill effluents (PPMEs), and they form pitch interfering with papermaking. Efficient and reliable resin acid removal is critically important to prevent toxicity discharge and ensure proper functioning of paper machines. Two resin-acid-degrading bacteria, Pseudomonas abietaniphila BKME-9 and Zoogloea resiniphila DhA-35, were tested in laboratory sequencing batch reactors (SBRs) for their ability to enhance resin acid removal by biomass from a full-scale biotreatment system treating PPMEs. Both bacteria enhanced resin acid removal but not removal of total organic carbon (TOC) by either pH-shocked or starved activated sludge. These two bacteria also increased resin acid removal when the sludge was given high concentration (200 microM) of resin acid. A most-probable-number polymerase chain reaction (MPN-PCR) assay showed that these two bacteria were initially not detectable (detection limit: 10(2) bacterial cells/ml) in the sludge community and were persistent after inoculation. Both bacteria did not substantially change the indigenous microbial community composition, as assayed by ribosomal intergenic spacer analysis (RISA). Our results suggest that it is feasible and potentially useful to enhance resin acid removal by bioaugmentation using resin-acid-degrading bacteria such as BKME-9 and DhA-35.