Related Experiment Video
Updated: Oct 9, 2026

An Anaerobic Biosensor Assay for the Detection of Mercury and Cadmium
Published on: December 17, 2018
Distribution of inorganic mercury in Sacramento River water and suspended colloidal sediment material
D A Roth1, H E Taylor, J Domagalski
1US Geological Survey, Boulder, Colorado 80303, USA.
Abstract:
The concentration and distribution of inorganic Hg was measured using cold-vapor atomic fluorescence spectrometry in samples collected at selected sites on the Sacramento River from below Shasta Dam to Freeport, CA, at six separate times between 1996 and 1997. Dissolved (ultrafiltered, 0.005 microm equivalent pore size) Hg concentrations remained relatively constant throughout the system, ranging from the detection limit (< 0.4 ng/L) to 2.4 ng/L. Total Hg (dissolved plus colloidal suspended sediment) concentrations ranged from the detection limit at the site below Shasta Dam in September 1996 to 81 ng/L at the Colusa site in January 1997, demonstrating that colloidal sediment plays an important role in the downriver Hg transport. Sequential extractions of colloid concentrates indicate that the greatest amount of Hg associated with sediment was found in the "residual" (mineral) phase with a significant quantity also occurring in the "oxidizable" phase. Only a minor amount of Hg was observed in the "reducible" phase. Dissolved Hg loads remained constant or increased slightly in the downstream direction through the study area, whereas the total inorganic Hg load increased significantly downstream especially in the reach of the river between Bend Bridge and Colusa. Analysis of temporal variations showed that Hg loading was positively correlated to discharge.
Related Concept Videos
Precipitation and Co-precipitation
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
