Related Experiment Video
Updated: Aug 13, 2026

Ferromagnetic Bare Metal Stent for Endothelial Cell Capture and Retention
Published on: September 18, 2015
Attractive force of castable iron-platinum magnetic alloys
I Watanabe1, Y Tanaka, H Fukunaga
1Department of Fixed Prosthodontics, School of Dentistry, Nagasaki University, 1-7-1 Sakamoto, 852-8588, Nagasaki, Japan.
Objective:
The objective of this study was to examine the attractive force of cast Fe-Pt alloys of varying compositions to dental iron-neodymium-boron magnets.
Methods:
Ingots of Fe-40 at%Pt, Fe-38 at%Pt, Fe-37 at%Pt and Fe-36 at%Pt alloys were cast in pattern molds for dental magnetic attachment keepers. The attractive forces of the cast Fe-Pt alloy keepers and magnetic stainless steel keepers to dental Fe(14)Nd(2)B magnets (MAGFIT and HICOREX) were measured and statistically evaluated. The saturation magnetization of each Fe-Pt alloy was determined by recording the hysteresis loop using a vibrating sample magnetometer under a magnetic field of 1.6 MA/m.
Results:
Decreasing the Pt percentage increased the saturation magnetization value and resulted in an increase of the attractive force to each magnet. There was no statistical difference (p>0.05) in attractive force between the Fe-36 at%Pt alloy specimens and the stainless steel keepers for both magnets. A definite correlation between Pt percentage and the value of saturation magnetization was also found (r(2)=-1.000).
Significance:
The Fe-Pt alloys with less than Fe-39.5 at%Pt produced high saturation magnetization values and great attractive force to the magnet, and thus, they have the potential to serve as magnetic attachment keepers. Of the Fe-Pt alloys tested, Fe-36 at%Pt seemed to be the best composition for making magnetic attachment keepers.
More Related Videos
14:51An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Published on: September 23, 2018
10:45Stable Aqueous Suspensions of Manganese Ferrite Clusters with Tunable Nanoscale Dimension and Composition
Published on: February 5, 2022
Related Concept Videos
Magnetic Force Between Two Parallel Currents
The force exerted by the magnetic field due to the first conductor over a finite length of the second conductor is given as the product of the current in the second conductor and the vector product of the length vector along the current element and the field due to the first conductor. According to the...
Diamagnetism
Diamagnetism was discovered by Anton Brugmans in 1778 when he observed that bismuth gets repelled by magnetic fields, thus theorizing that diamagnets get repelled by magnets.
Ferromagnetism
Paramagnetism
Potential Due to a Magnetized Object
The vector...
Magnetic Susceptibility and Permeability
When diamagnetic materials are placed under an external magnetic field, the moments opposite to the field are induced. Hence, the susceptibility for diamagnets has a minimal negative value of 10-5–10-6. Since...