Related Experiment Video
Updated: Aug 11, 2026

A Novel Bioreactor for High Density Cultivation of Diverse Microbial Communities
Published on: December 25, 2015
Alternative analysis of BOD removal in subsurface flow constructed wetlands employing Monod kinetics
1Department of Chemical Engineering, Building J01, University of Sydney NSW 2006, Australia. cynthia@chem.eng.usyd.edu.au
Abstract:
A new, mechanistic approach for design and analysis of subsurface flow (SSF) constructed wetlands is presented. The model is based on the assumption that the biological processes in wetlands, like other biological systems, exhibit Monod kinetics. A Monod approach fits well with observed wetland performance. It predicts first-order behaviour at low concentrations, that is, pollutant removal rates which increase with increasing pollutant concentration; and zero-order or saturated behaviour at high pollutant concentrations, that is, a maximum pollutant removal rate. A kinetic analysis of subsurface flow constructed wetlands exhibiting Monod kinetics reveals that loading rate, as well as the zero-order degradation rate constant, are essential parameters for efficient wetlands design for the removal of organic carbon. In particular, Monod kinetics enables the identification of an absolute maximum removal rate which is necessary to prevent undersizing in design. This is significant because it represents a theoretical upper bound on loading rate for wetlands design. The analysis is applied to wetlands data collected in North America by the US EPA in order to extract design criteria for BOD removal. It reveals that maximum loadings for SSF wetlands are at least 80 kg ha-1 d-1 for BOD. In addition, a new dimensionless performance efficiency parameter, omega, is presented as a more effective means of comparing wetland performance.
Related Concept Videos
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Typical Model Studies
Design Example: Creating a Hydraulic Model of a Dam Spillway
Microbial Bioremediation of Hydrocarbons
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water

