Decomposition of hazardous organic materials in the solidification/stabilization process using catalytic-activated...

The application of a catalytic-activated carbon to the solidification/stabilization (S/S) process for immobilization of phenol and 2-chlorophenol and catalytic decomposition was investigated. The effect of the catalytic-activated carbon, in amounts of 0.25-1% (by dry sand wt.), on the leaching of phenol and 2-chlorophenol was studied. H2O2 was added as a source of oxygen in the amounts of 1 or 5%, with respect to liquid solution weight. Toxicity characteristic leaching procedure (TCLP) leaching tests showed that adding the catalytic-activated carbon to the S/S matrix significantly reduced the leachability of both phenol and 2-chlorophenol. Only trace amounts of phenol were found in the leaching solution, while the concentration of 2-chlorophenol was below the detection limit of the gas chromatography (GC). Without addition of the catalytic-activated carbon, 87% of the phenol and 92% of the 2-chlorophenol leached. Additional tests on TCLP leachate solutions using GC-mass spectrometry indicated the existence of simple, less hazardous, hydrocarbons, including alcohol. Catalytic-activated carbons treated with phenol in the presence of H2O2 were also analyzed using time of flight-secondary ion mass spectroscopy (TOF-SIMS). Results indicate that the phenol aromatic ring was broken by the catalytic reaction.