Simultaneous direct determination of amiloride and triamterene in urine using isopotential fluorometry

A method for the simultaneous fluorometric determination of two diuretics in urine is proposed. The combination of matrix isopotential synchronous fluorescence (MISF) and first derivative techniques provides good analytical results. MISF spectra are obtained by calculating the isopotential trajectory in the three-dimensional fluorescence spectrum for a urine solution. In the spectral contour, the trajectory is taken to be the portion of the line that passes by the fluorescence maxima of both diuretics (lambda(ex) = 365 and lambda(em) = 413 nm for amiloride and lambda(ex) = 365 and lambda(em) = 437 nm for triamterene). Because contour lines connect points of identical intensity and the trajectory is part of a contour line, it is called "isopotential." Analyses was carried out in a 1/1 (v/v) ethanol/water mixture, using an apparent pH of 6.3 provided by 0.01 M sodium/citrate citric acid buffer. Urine samples are diluted 50 times and provide linear calibration plots at amiloride and triamterene concentrations up to 320 and 100 ng mL(-1), respectively. The goodness of the analytical signal was checked by using variance analysis. Signals recorded throughout the calibration range were subjected to three calibrations per each analyte, both in the absence and in the presence of variable amounts of the other analyte. Differences between individual calibrations and slopes were compared with those within individual calibrations. Based on the results, triamterene and amiloride can be accurately quantified in the presence of each other. The limit of detection calculated according to Clayton who uses error propagation throughout the calibration curve and a noncentralized security factor was 16.8 and 2.4 ng mL(-1) for amiloride and triamterene, respectively.