Investigation of polychlorinated biphenyl removal from contaminated soil using microwave-generated steam
Related Experiment Video
Updated: Oct 5, 2026

Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites
Published on: November 28, 2014
1Department of Civil and Environmental Engineering, University of California-Davis, Davis, California, USA. pdi@arb.ca.gov
Abstract:
A feasibility study of polychlorinated biphenyl (PCB) removal from contaminated soils using microwave-generated steam (MGS) was performed. Initial experimental results show that MGS effectively removed PCBs from contaminated soil with an overall removal efficiency of greater than 98% at a steam-to-soil mass ratio of 3:1. Removal efficiency was found to be dependent upon the amount of steam employed, expressed as a mass ratio of steam applied to soil mass. Evaporation was identified as a major mechanism in removing PCBs from the soil. Rapid expansion and evaporation of pore water by microwave dielectric heating accelerated evaporation rates of PCB molecules. Increased solubility of PCBs into the heated aqueous phase is also hypothesized. Together these effects increase mass-transfer rates, thus enhancing removal of PCBs from the soil.
Related Concept Videos
Microbial Bioremediation of Hydrocarbons
Microbial Bioremediation of Pesticides

