Related Experiment Video
Updated: Aug 19, 2026

On-chip Isotachophoresis for Separation of Ions and Purification of Nucleic Acids
Published on: March 2, 2012
Effect of initial buffer composition on pH changes during far-from-equilibrium freezing of sodium phosphate buffer
G Gómez1, M J Pikal, N Rodríguez-Hornedo
1Dupont Pharmaceuticals, Manatí, Puerto Rico.
Purpose:
This study aims to assess the pH changes induced by salt precipitation during far-from-equilibrium freezing of sodium phosphate buffers as a function of buffer composition, under experimental conditions relevant to pharmaceutical applications-sample volumes larger than a few microliters, experiencing large degrees of undercooling and supersaturation.
Methods:
Buffer solutions were prepared by dissolving the monosodium and disodium phosphate salts in the appropriate ratios to obtain initial buffer concentrations in the range of 8-100 mM and pH values between 5.7 and 7.4 at 25 degrees C. Temperature and pH were monitored in situ during cooling to -10 degrees C (at a rate of 0.3 to 0.5 degrees C/min) and for 10-20 min after the sample reached the final temperature. Salt crystallization was confirmed by ion analysis and x-ray powder diffraction.
Results:
Precipitation of Na2HPO4, 12H2O caused abrupt pH decreases after the onset of ice crystallization, at temperatures between -0.5 and -4.0 degrees C. Decreasing the initial buffer concentration and/or initial pH resulted in higher final pH values at -10 degrees C, farther removed from the equilibrium value of 3.6. At an initial pH of 7.4, the 50 and 100 mM buffer solutions reached a pH of 4.2 +/- 0.1 at -10 degrees C, whereas the 8 mM solutions reached a pH of 5.2 +/- 0.2. Solutions having an initial pH of 5.7 and initial buffer concentrations of 8 and 100 mM experienced less pH shifts upon freezing to -10 degrees C, with final pH values of 5.1 +/- 0.1 and 4.7 +/- 0.1, respectively.
Conclusions:
Precipitation-induced pH shifts are dependent on the concentrations (activities) of precipitating ions, and are determined by both initial pH and salt concentration. The ion activity product is a meaningful parameter when describing salt precipitation in solutions prepared by mixing salts containing precipitating and nonprecipitating ions.
More Related Videos
09:38Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies
Published on: January 3, 2018
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
Related Concept Videos
Common Ion Effect
Buffers
Calculating pH Changes in a Buffer Solution
Buffer Effectiveness
The buffer capacity is the amount of acid or base that can be added to a given volume...
Protein Buffers in Blood Plasma and Cells
Certain amino acids can exist in a zwitterion state at a...
Phosphate Buffer
Sodium dihydrogen phosphate does not fully dissociate in neutral or acidic solutions. When a strong base, such as sodium hydroxide (NaOH), is introduced into the solution, sodium dihydrogen phosphate...