Effect of solid surface composition on the migration of tributyltin in groundwater

Tributyltin (TBT) is the most important organotin compound that has been introduced into aquatic ecosystems. A better understanding of its interactions with solid surfaces is essential to estimate the possibilities of TBT migration through subsurface environments. For this purpose, TBT sorption onto a porous matrix of natural origin, a quartz sand as an aquifer material, was studied at low concentration levels with a monodirectional model of column type allowing sequential investigation of sorption and desorption processes. Different treatments of the solid phase were performed by injecting alkaline solutions, NaOH at pH 10.8 or NaClO-NaCl at pH 11.5, by decreasing the ionic strength or by adding kaolinite to change the surface composition and properties. The removal of iron and aluminum (hydr)oxides from the sand surface did not affect so much the sorption (decrease in 14% as compared to sorption on the raw sand). The original use of X-ray photoelectron spectroscopy to control treatment efficiency and to characterize sand surface modifications permitted to relate TBT sorption onto the aquifer material to quartz, the main component of the sand, and clay minerals (mainly kaolinite) present at trace levels at the sand surface. A first attempt of transport modeling with these two surface sites showed the consistency of our assumption. Moreover, estimation of Langmuir-type constants showed that TBT sorption affinity for the quartz surface (KL = 26.7 L micromol(-1)) was much greater than for kaolinite (KL = 6.3 L micromol(-1)).