Aerial measurements on uranium ore mining, milling and processing areas in Germany
Related Experiment Video
Updated: Oct 7, 2026

Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
I Winkelmann1, M Thomas, K Vogl
1Federal Office for Radiation Protection, 10318 Berlin, Germany. iwinkelmann@bfs.de
Abstract:
The paper describes aerial measurements at several sites containing residues from uranium mines, waste rock dumps and tailings ponds of the Wismut company in Saxony and Thuringia. For the measurements, a computerized gamma-ray spectrometer equipped with a HPGe-detector and a NaI(Tl)-detector array with a volume of 121 was used. Radioactive anomalies from natural radionuclides have been detected and mapped. The activity concentrations of 226Ra, 228Th and 40K in areas with elevated radioactivity from natural radionuclides were determined from aerial measurements. Ground-based measurements--as far as available--confirmed these results. The mean 226Ra activity concentrations in the different waste rock dumps were found to be in the range 370 to 1600 Bq kg-1. The highest mean 226Ra activity concentrations were measured for the tailings ponds with values up to 1300 Bq kg-1. For 40K and 208Tl, activity concentrations of 860 and 40 Bq kg-1, respectively, were obtained as averages of all measurements. These values are commonly found in the environment. In general, there is reasonable agreement between the results measured with different detectors and measuring methods.
More Related Videos
14:53In Situ Detection and Single Cell Quantification of Metal Oxide Nanoparticles Using Nuclear Microprobe Analysis
Published on: February 3, 2018
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Microbial Bioremediation of Uranium
Atomic Emission Spectroscopy: Overview
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing nebulizer...