Scanning electrochemical microscopy. 41. Theory and characterization of ring electrodes

Ring ultramicroelectrodes, which are of particular interest as probes for scanning electrochemical microscopy (SECM), combined with near-field scanning optical microscopy, were investigated. Theoretical SECM tip current-distance (approach) curves for a ring electrode were calculated by numerical (finite element) analysis. The SECM curves obtained were a function of the geometry of the tips including the thickness of the ring and the insulating sheath. Theoretical approach curves over conductive substrates showed a strong dependence on the ratio of inner to outer radii of ring microelectrodes (a/b) and were relatively insensitive to the thickness of the insulating sheath (r(g)). For insulating substrates, however, the approach curves varied significantly with r(g), but much less with the a/b ratio. Comparison of experimental and theoretical SECM curves provided a good method of evaluating the size and shape of ring electrodes. Good agreement of the experimental and theoretical curves was found with a ring microelectrode with a nominal 200-nm ring thickness, yielding values of 1.7, 1.9, and 5.7 microm for the inner (a) and outer (b) radii of a ring and the outermost radius of insulating sheath (r(g)), respectively.