Related Experiment Video
Updated: Jul 25, 2026

Measuring and Mapping Patterns of Soil Erosion and Deposition Related to Soil Carbonate Concentrations Under Agricultural Management
Published on: September 12, 2017
Evaluation of recharge in a small temperate catchment using natural and applied delta 18O profiles in the unsaturated
C McConville1, R M Kalin, H Johnston
1Environmental Engineering Research Centre, School of Civil Engineering, Queen's University of Belfast, Belfast, Northern Ireland, BT7 1NN. ciaramc@patbritcom.au
Abstract:
A water balance study was used for determining recharge rate and mechanisms in the Enler Catchment, Northern Ireland. Here spatially limited data for the water balance resulted in varied calculation of the annual and monthly net infiltration rate. This paper outlines a method whereby high-resolution soil profiles (1 to 2 cm) were obtained from field cores in the upper 2 m of the unsaturated zone using delta 18O of water. These profiles show changes in isotopic composition that range from individual rainfall events to annually integrated cycles of rainfall. Recharge rates were calculated from stable isotope profiles for each of the four main soil types in the study catchment and summed over each area resulting in an average recharge in the range 55 to 70 mm/a, which is comparable with previous findings. Applied isotopic tracer tests were also conducted to evaluate the extent of preferential flow through the two main soil types in the catchment. Rates of water movement found from these experiments show good agreement with natural isotopic profiles; however, evidence suggests that preferential flow is not the dominant process controlling water movement in this catchment. This type of data provides valuable information about recharge rates and mechanisms and may facilitate better prediction of contaminant transport pathways in the vadose zone.
Related Concept Videos
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment

