Vertebral pedicle anatomy in relation to pedicle screw fixation: a cadaver study

New techniques to stabilize and correct the thoracic and lumbar spine have been developed in recent years. In view of the wide variety and complexity of fixation devices, the optimum configuration of spinal instrumentation systems needs to be defined. Linear and angular measurements of both vertebral pedicles were made in ten complete thoracic and lumbar cadaveric spines using callipers and a goniometer. The vertical interpedicular distance gradually increased along the spine up to L5. The transverse interpedicular distance was larger at both ends of the spine. Pedicular height gradually increased from T1 to L5, plateauing between T3 and T9, being widest at the thoracolumbar junction. Pedicular width was greatest at the three junctional regions of the spine. The sagittal pedicular angle decreased along the length of the spine to zero at L5. The transverse pedicular angle decreased from T1 to T12 and then increased to L5. Of the pedicular measurements only width limits the diameter of fixation screws. The vertical interpedicular distance determines the distance between the holes of plates, while the length of the transfixator is related to the transverse interpedicular distance. The pedicular angles enable triangulation of screws and determine the stability of the fixation.