Laser-enhanced ionization and laser-induced atomic fluorescence as element-specific detection methods for gas chromatography. Application to organotin analysis
Related Experiment Video
Updated: Oct 5, 2026

Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
Abstract:
We have demonstrated that flame laser-enhanced ionization (LEI) and flame laser-induced atomic fluorescence (LIAF) techniques can be used as, alternative sensitive detectors for gas chromatographic (GC) analysis of organotin compounds. These two element-specific detection methods are free from interferences from the organic solvent. Two types of LEI schemes for Sn detection are employed. For the two-step LEI scheme (TLEI), the tin atoms in the flame were stepwise excited and then ionized collisionally. In contrast, in detection with the single-step LEI scheme (SLEI), only one dye laser is used. For the analysis of tetramethyltin and tetraethyltin, the GC-TLEI, GC-SLEI, and GC-LIAF systems yield linear dynamic ranges of 0.015-400, 0.39-600 and 0.5-600 ng, respectively. The corresponding detection limits reach 0.15, 3.9 and 5.0 mg/l, with absolute quantities corresponding to 15, 390 and 500 pg, respectively, for an injection volume of 0.1 microl. These detection methods prove to be more sensitive and selective than the conventional flame ionization detection, which achieves absolute detection limits of 800 and 1667 pg for tetraethyltin and tetramethyltin, respectively, under identical GC conditions.
More Related Videos
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
08:07A Two-Step Pyrolysis-Gas Chromatography Method with Mass Spectrometric Detection for Identification of Tattoo Ink Ingredients and Counterfeit Products
Published on: May 22, 2019
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
High-Performance Liquid Chromatography: Types of Detectors