Variations of landfill leachate's properties in conjunction with the treatment process

A study was done on the variations of water quality parameters, in conjunction with the processing steps, installed for the treatment of leachate from a sanitary landfill. The leachate was primarily subjected to biological treatment, composed of anaerobic digestion, aerobic treatment, and rotating biological contact in series. The effluent from the rotating biological contact process was further treated by combination of flocculation-sedimentation and adsorption processes. Finally, it was polished by the reverse osmosis process before discharge. The quality of raw leachate, of influents to and of effluents from the reverse osmosis process was assessed and compared. To determine size--dependent behavior of organic materials, analyses were also made for the fractionated samples through ultrafiltration. The overall treatment efficiency was about 98% for removal of organic materials. Most of the organic materials were in the low molecular weight range. In particular, about 95% of the biological oxygen demand was found to be exerted by the fraction of organic material of which cut -off molecular weight was less than 500. The analysis of molecular weight distribution confirmed that the organic materials resistant to the removal by the treatment process were humic substances, of which cut off molecular weight was greater than 500. The reverse osmosis process showed a high efficiency for removal of high molecular weight constituents. However, the final effluent showed an unexpectedly high oxygen demand.