Low-gravity environment in Spacelab

This paper presents residual and system-generated accelerations with results from g-jitter spectral measurements in the Spacelab Engineering Model. An overview (classification, brief discussion, and assessment of magnitudes) of the various constituents of the perturbative acceleration field inside the Spacelab Module is presented, both steady and fluctuating components being considered. Results of local g-jitter spectral measurements taken in the Spacelab Engineering Model (EM-1)/Long Module Configuration are presented for frequencies from less than 1 to 200 Hz. The measured results for the system-generated perturbative accelerations exhibit, in the time domain, amplitudes of the order of 10(-3) g (peak value 3.6 x 10(-3) g). Spectral values of 4 x 10(-4) g are obtained in the frequency range up to 100 Hz; up to 10 Hz, however, the spectral values remain about an order of magnitude smaller, and also between 100 and 200 Hz the perturbation level is significantly lower than below 100 Hz. Measured results from simulated crew activities show, in the time domain, a peak amplitude of 2.6 x 10(-2)g, the spectral values being 6 x 10(-3)g below 100 Hz and 1 x 10(-3)g below 10 Hz for typical perturbances.