The corrosion resistance of pure titanium in organic acids

The purpose of this study was to assess the corrosive properties of titanium at various pH values. Cast pure titanium specimens were immersed in 128 mmol/l of lactic and formic acids at pH 1.0-8.5 for 3 weeks at 37 degrees C. The solubility, color, weight and chemical binding state of specimens were observed. Titanium dissolved in all lactic acid. The amount of dissolved titanium tended to decrease with a higher pH. In formic acid, the amount of dissolved titanium at pH 1.0 was larger than that in lactic acid at the same pH, but less than the detectable limit at pH 4.0 or higher. Significant discoloration was macroscopically observed only in formic acid at pH 2.5 and 4.0. The weight of the titanium samples immersed in lactic acid all decreased, but it was not affected by pH. In formic acid, the weight decreased at pH 1.0 and increased at pH 2.5-5.5. Thickening of the TiO2 corresponding to that showing discoloration was observed in the superficial oxide film of the titanium samples. Our results show that the corrosive properties of titanium are markedly dependent on pH in formic acid, and relatively less dependent on pH in lactic acid in which titanium is dissolvable at pH 1.0-8.5.