Related Experiment Video
Updated: Sep 6, 2026

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
[Removing the nitrogen from the ammonium sulfite method paper mill wastewater by anoxic/aerobic SBR]
1Open Laboratory of Henan's College and Universities, Chemistry and Environmental Science College of Henan Normal University, Environmental Science and Engineering, Xinxiang 453002, China.
Abstract:
The experiment results showed that the best technology of removing the nitrogen was anoxic time to aerobic time of 1:1.5, a cycle of 8 hours; the SRT should be more than 12 d and the loading of NH3-N should be less than 0.063 g/(g.d); when the concentration of CODCr, NH3-N and NOx-N was 1200-1800 mg/L, 135-200 mg/L and 7-10 mg/L respectively, without external carbon sources, the removal rate of NH3-N and TN could respectively achieve 95% and 66%; after adding sodium acetate the removal rate of TN could get to 85%. The addition of sodium acetate at the concentration equivalent to theoretical CODCr values of 125 mg/L appeared to be the most economical and reliable option.
More Related Videos
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
08:05Measurement of the Potential Rates of Dissimilatory Nitrate Reduction to Ammonium Based on 14NH4+/15NH4+ Analyses via Sequential Conversion to N2O
Published on: October 7, 2020
Related Concept Videos
Overview of Nitrogen Metabolism
The largest pool of nitrogen available in the terrestrial ecosystem is gaseous nitrogen (N2) from the air, but this nitrogen...
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water