The transport of octamethylcyclotetrasiloxane (D4) and polydimethylsiloxane (PDMS) in lightly cross-linked silicone...

The transport of octamethylcyclotetrasiloxane (D4), one of the major constituents of silicone fluids and rubbers, and low viscosity polydimethylsiloxane oil into a silica filled cross-linked silicone elastomeric rubber was measured as a function of temperature, cross-link density of the rubber, and concentration of the D4 in methanol solution. A small amount of material, approximately 3 wt%, is extracted from the rubber with hexane. The extraction process has a large effect upon D4 solubility in the rubber, increasing from approximately 160 to 180 wt% after extraction. The heats of solution for both penetrants into the rubber are essentially zero and the activation energies for diffusion are small, approximately 8 and 15 kJ molt(-1) for D4 and PDMS, respectively. The diffusion process is Fickian and the diffusion coefficient of D4 into silicone/silica rubbers is essentially independent of concentration over the concentration investigated, i.e. from 1 to 100 vol% D4 in methanol. The permeability, i.e. the product of the diffusion coefficient and the solubility, decreases rapidly for D4 concentrations less than 50 vol% (0.1 mol fraction). This suggests that the permeation of D4 out of any encapsulation device, such as a silicone breast implant, is linearly dependent upon the concentration of D4 in the prosthesis. Swelling is isotropic and was measured by dimensional changes in rectangular samples and correlates well with the volume of D4 sorbed.