Nitrate determination in baby food, using the nitrate ion selective electrode

The nitrate electrode has been utilized in the determination of nitrate content in food products. The AOAC xylenol method was employed for comparative results. A reasonable correlation (r=0.91) was found between the 2 methods in the analysis of 49 samples containing 30-350 ppm nitrate. At the average nitrate content (100 ppm) of these foods, the standard error was 4.3 ppm. The electrode responds directly to the ionic activity of the nitrate ion. It has a linear concentration range of 1-6000 ppm nitrate and can be used over a wide pH range. The electrode does respond to some extent to anions other than nitrate, and some interferences do occur. These interferences are easily controlled by the use of cation exchange resins. The Corning known addition (spiking) method is used on all samples to insure correct electrode response in solutions containing variable background ionic composition. The electrode has the advantage of simplicity, speed, reproducibility, and accuracy. Work time saved using the electrode as opposed to the xylenol method is about 7 hr for the analysis of 20 samples. Error, and the need for repeating analysis, is much less frequent.