Predicting the elution behavior of proteins in affinity chromatography on non-porous particles

Affinity chromatography on non-porous particles of microsize is particularly useful for the rapid analysis and micropreparative separation of proteins. The elution behavior of proteins in an affinity column packed with non-porous copolymerized particles of styrene, methyl methacrylate and glycidyl methacrylate was investigated both theoretically and experimentally, using the lysozyme-Cibacron Blue 3G-A affinity system. Equations used to predict the elution profiles, resulting from the elution by increasing the ionic strength (NaCl concentration) in the mobile phase, were obtained. The maximum adsorbate concentration, desorption rate constant and equilibrium constant under elution conditions were determined by matching experimental data with predicted elution profiles. Based on the parameters determined at a flow-rate of 0.5 ml/min and with 1 M NaCl in the elution buffer, the model equations could predict the elution profiles for other experimental runs, where different flow-rates and sodium chloride concentrations were used. Both the experimental and predicted results revealed that the affinity interaction kinetics are not significantly influenced by the flow-rate and, hence, the film mass transfer. To elute bound lysozyme from immobilized dye ligand, a higher value of the ionic strength leads to a faster elution and a sharper elution peak. The influence of elution conditions on the kinetic and thermodynamic parameters and, consequently, on the elution peak profiles was evaluated. The model equations can also predict the behavior of protein elution from an affinity column by changing the pH of the mobile phase, according to a previous study.