Microbial dechlorination of three PCB congeners in river sediment

We investigated the potential for the anaerobic degradation of three PCB congeners (2,3,5,6-CB, 2,3,4,5-CB, and 2,3,4,5,6-CB) in sediments collected from five monitoring sites along the Keelung River in northern Taiwan. Optimal conditions for congener dechlorination were 30 degrees C and pH 7.0. Intermediate 2,3,4,5-CB products were identified as 2,3,5-CB, 2,4,5-CB, and 2,5-CB. Intermediate 2,3,4,5,6-CB products were identified as 2,3,5,6-CB, 2,3,6-CB, and 2,5-CB. For 2,3,5,6-CB, intermediate products were identified as 2,3,6-CB and 2,5-CB. Dechlorination rates for PCB congeners were observed as (fastest to slowest): 2, 3, 4-CB > 2, 3, 4, 5-CB > 2, 3, 4, 5, 6-CB > 2, 3, 5, 6-CB > 2, 2', 3, 3', 4, 4'-CB > 2, 2', 4, 4' 6, 6'-CB > 2, 2', 3, 4, 4', 5, 5'-CB > 2, 2', 3, 3', 4, 4', 5, 5'-CB. Rates decreased for mixtures of the eight congeners. Dechlorination rates for the three primary congeners under different reducing conditions occurred in the order of (fastest to slowest): methanogenic condition > sulfate-reducing condition > nitrate-reducing condition. Under methanogenic and sulfate-reducing conditions, dechlorination rates were enhanced by the addition of lactate, pyruvate, or acetate, but delayed by the addition of manganese oxide, or ferric chloride. Under nitrate-reducing condition, dechlorination rates were delayed by the addition of lactate, pyruvate, acetate, manganese oxide or ferric chloride. Treatment with such microbial inhibitors as bromoethanesulfonic acid (BESA) or molybdate revealed that methanogen and sulfate-reducing bacteria were involved in the dechlorination of these three PCB congeners.