Related Experiment Video
Updated: Oct 3, 2026

Fabrication of Small Caliber Stent-grafts Using Electrospinning and Balloon Expandable Bare Metal Stents
Published on: October 26, 2016
Covered Gianturco stent for tracheal stricture: application of polychlorovinylidene and polyurethane as covering
K Sugimoto1, S Hirota, K Imanaka
1Department of Radiology, Kobe University School of Medicine, 7-5-2, Kusunoki-cho, Chuo-ku, Kobe 650-0017, Japan. kojirad@med.kobe-u.ac.jp
Abstract:
The aim of this study was to assess the efficacy and safety of thin membranes of polychlorovinylidene (PCV) or polyurethane (PU) as covering materials for Gianturco stents in the treatment of severe tracheal stricture caused by intraluminal tumor. Manufactured Gianturco stents covered with PCV or PU membrane were used to treat six malignant and one benign tracheal stricture. The initial results, complications, clinical follow-up, bronchoscopic findings, and three autopsy microscopic examinations were reviewed. Informed consent was obtained after the nature of the treatment had been fully explained before every procedure. The stents successfully dilated the tracheal strictures, providing immediate relief of respiratory symptoms in all patients with no major complications. During the follow-up period, the covering materials prevented tumor ingrowth until death or intraluminal granuloma formation. Autopsies proved that no histological change occurs in the tracheal mucosa in response to the presence of PCV or PU; however, ulcer formation occurred in one patient and penetration of the stent struts into the tracheal wall in two. Bloody sputum with ulcer formation, minimal granuloma formation at the distal end of the stent, and abnormal bacterial load in the sputum were long-term complications. The Gianturco stent covered with PCV or PU membrane is a useful option as a palliative treatment for malignant and an emergent salvage for benign tracheal stricture, because both materials are thinner and less voluminous than the others. However, the indications for its use are limited to patients with poor prognoses, because hemoptysis, granuloma formation, and bacterial propagation remain problematic.
Related Concept Videos
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask and...
Tracheostomy Decannulation
Description of the Procedure
Decannulation refers to the permanent removal of the tracheostomy tube, signaling the resolution of the condition that initially necessitated the tracheostomy. The process requires a well-coordinated interplay between...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Trachea
Anatomical Features:
Location: About half of the trachea is situated in the neck, anterior to the esophagus, and extends from the larynx (at the level of the...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
