Related Experiment Video
Updated: Aug 12, 2026

Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering
Published on: September 16, 2016
Sampling and analysis of gaseous pollutants and related particulate matter in a Mediterranean site: Antalya-Turkey
1Department of Chemistry, Middle East Technical University, Ankara, Turkey.
Abstract:
Gas phase pollutants. nitric acid (HNO3), sulfur dioxide (SO2), ammonia (NH3) and particulate matter, were collected simultaneously for six months from the Eastern Mediterranean atmosphere (Küçük Calticak, Antalya) using a "filter pack" system developed in our laboratory. This system is a combination of chemically treated filters for the collection of gaseous ammonia and sulfur dioxide. and Teflon and nylon filters for the collection of particulate matter and gaseous nitric acid, respectively. After pre-treatment, Teflon, nylon and the treated filters were analyzed by ion chromatography (IC) for major ionic species: SO4(2-) NO3- and Cl, and by colorimetry for NH4+ ion. Comparison of the SRM (Standard Reference Material) results with measured concentrations showed a good precision for the IC analyses: 3%, 1% and 2% for Cl-, NO3 and SO4(2-) ions. respectively. Most of the measured parameters were log-normally distributed. Chloride ion had the highest (4.30 microg m(-3) and HNO3 had the lowest (0.42 microg m(-3)) concentrations. Total acidity in the Eastern Mediterranean is controlled by 47.7% HNO3 and 52.8% by H2SO4. Ammonium, nss-SO4(2-) (non-sea salt sulfate) and NO3 did not show a strong correlation, (r = 0.4), which means that ammonia is not the major neutralizing species in the Eastern Mediterranean atmosphere.
More Related Videos
05:45Composition and Distribution Analysis of Bioaerosols Under Different Environmental Conditions
Published on: January 7, 2019
09:33Visualizing Field Data Collection Procedures of Exposure and Biomarker Assessments for the Household Air Pollution Intervention Network Trial in India
Published on: December 23, 2022
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...