Loading the problem loader: the effects of target training and shaping on trailer-loading behavior of horses

D L Ferguson1, J Rosales-Ruiz

  • 1University of North Texas, Denton 76203, USA.

Related Concept Videos

Load along a Single Axis01:29

Load along a Single Axis

In structural engineering, the analysis of beams subjected to varying loads is a critical aspect of understanding the behavior and performance of these structural elements. A common scenario involves a beam subjected to a combination of different load distributions.
Consider a beam of length L subjected to a varying load, which is a combination of parabolic and trapezoidal load distribution along the x-axis. In this case, it is essential to determine the resultant loads, their locations, and...
Elastic Curve from the Load Distribution01:16

Elastic Curve from the Load Distribution

The structural behavior of beams under distributed loads is critical for engineering analysis, which focuses on predicting how beams bend and react under such conditions. Different types of beams (e.g., cantilever, supported, or overhanging) behave differently under distributed load conditions.
For all beams, the analysis of the beam's reaction to distributed loads begins by understanding the relationship between a beam's load and the resulting shear forces and bending moments. Initially, this...
Eccentric Loading01:16

Eccentric Loading

Eccentric loading is a crucial concept in the study of structural engineering and mechanics, particularly when analyzing the stability and stress distribution in columns. Unlike centric loading, where the force is applied along the centroidal axis, causing uniform compression, eccentric loading occurs when a force is applied off-center. This off-center application introduces not only direct compressive stress but also bending stress, significantly influencing the column's behavior under load.
Impact Loading01:19

Impact Loading

Impact loading occurs when a moving object collides with a stationary structure, such as a rod with a uniform cross-sectional area fixed at one end. Under these conditions, the rod absorbs the kinetic energy from the striking object, leading to deformation and subsequent stress development. As the rod returns to its original position and reaches maximum stress, the absorbed energy, initially manifested as kinetic energy, transforms entirely into strain energy.
In cases of elastic deformation,...
Law of Effect01:06

Law of Effect

B.F. Skinner, a prominent figure in behavioral psychology, introduced operant conditioning by emphasizing the role of consequences in shaping behavior. This theory builds upon the law of effect proposed by Edward Thorndike, which posits that behaviors followed by satisfying outcomes are likely to be repeated. In contrast, those followed by unsatisfying outcomes are less likely to recur.
Edward Thorndike's foundational work involved studying learning in animals, particularly using puzzle boxes...
Role of Shaping in Operant Conditioning01:19

Role of Shaping in Operant Conditioning

Shaping is a technique used in operant conditioning to train complex behaviors by rewarding successive approximations toward the target behavior. This method is necessary because organisms are unlikely to perform complex behaviors spontaneously. Instead, shaping breaks down the desired behavior into small, manageable steps.
The steps involved in shaping begin with reinforcing any response that resembles the desired behavior. For example, parents might praise a child for picking up one toy. As...