Shearing microscopy using polarized optical microscope with shear stage and spectral analyser to study liquid...

In-situ polarized optical microscopy using a shear stage and a spectral analyser as well as a CCD camera were applied to study the phase transition under shear flow for a thermotropic and side-chain-type liquid crystalline polysiloxane. The onset of the appearance of anisotropic texture of the polysiloxane was observed under shear flow using the CCD camera at temperatures much higher than the isotropic-liquid crystalline phase transition temperature if the polysiloxane was cooled from the isotropic phase in the quiescent state. Both the onset temperature and the temperature for full development of the anisotropic texture across the field of view became higher as the shear rate increased. The transmitted light intensity was also measured using a spectral analyser with crossed polarisers at wavelengths from 300 nm to 800 nm, and the integrated intensity of the spectrum was calculated. Changes in the spectrum and the integrated intensity against temperature in the cooling process were compared with observation using the CCD camera. Temperature dependence of the integrated intensity showed that the onset of the appearance of the anisotropic texture under high shear rates was detected at temperatures slightly higher than that observed using the CCD camera.