Effect of alcohol addition on the movement of petroleum hydrocarbon fuels in soil
Related Experiment Video
Updated: Oct 2, 2026

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions
Published on: June 6, 2017
Gillian Adam1, Keiji Gamoh, David G Morris
1Department of Chemistry, University of Glasgow, Scotland, UK. gilliana@chem.gla.ac.uk
Abstract:
Groundwater contamination by fuel spills from aboveground and underground storage tanks has been of growing concern in recent years. This problem has been magnified by the addition of oxygenates, such as ethanol and methyl-tertiary-butyl ether (MTBE) to fuels to reduce vehicular emissions to the atmosphere. These additives, although beneficial in reducing atmospheric pollution, may, however, increase groundwater contamination due to the co-solvency of petroleum hydrocarbons and by the provision of a preferential substrate for microbial utilisation. With the introduction of ethanol to diesel fuel imminent and the move away from MTBE use in many states of the USA, the environmental implications associated with ethanol additive fuels must be thoroughly investigated. Diesel fuel movement was followed in a 1-m soil column and the effect of ethanol addition to diesel fuel on this movement determined. The addition of 5% ethanol to diesel fuel was found to enhance the downward migration of the diesel fuel components, thus increasing the risk of groundwater contamination. A novel method using soil packed HPLC columns allowed the influence of ethanol on individual aromatic hydrocarbon movement to be studied. The levels of ethanol addition investigated were at the current additive level (approx. 25%) for ethanol additive fuels in Brazil and values above (50%) and below (10%) this level. An aqueous ethanol concentration above 10% was required for any movement to occur. At 25% aqueous ethanol, the majority of hydrocarbons were mobilised and the retention behaviour of the soil column lessened. At 50% aqueous ethanol, all the hydrocarbons were found to move unimpeded through the columns. The retention behaviour of the soil was found to change significantly when both organic matter content and silt/clay content was reduced. Unexpectedly, sandy soil with low organic matter and low silt/clay was found to have a retentive behaviour similar to sandy subsoil with moderate silt/clay, but little organic matter. It was concluded that sand grains might have a more important role in the adsorption of petroleum hydrocarbons than first realised. This method has shown that soil packed HPLC columns can be used to provide a quick estimate of petroleum hydrocarbon, and possibly other organic contaminant, movement in a variety of different soil types.
Related Concept Videos
Microbial Bioremediation of Hydrocarbons
Physical Properties of Alcohols and Phenols
Alcohols possess a higher boiling point than aliphatic hydrocarbons of similar...
Acid-Catalyzed Hydration of Alkenes
Preparation of Alcohols via Addition Reactions
The acid-catalyzed addition of water to the double bond of alkenes is a large-scale industrial method used to synthesize low-molecular-weight alcohols. An acidic atmosphere is required to allow the hydrogen in the water molecule to act as an electrophile and attack the double bond in an alkene. The addition of a proton to the double bond creates a carbocation intermediate. The proton preferentially bonds to the less substituted end of the double bond to create a more stable carbocation...
Microbes in Beverage Production
Solvating Effects

