Related Experiment Video
Updated: Aug 9, 2026

Three-dimensional Optical-resolution Photoacoustic Microscopy
Published on: May 3, 2011
Detection of ammonia by photoacoustic spectroscopy with semiconductor lasers
Andreas Schmohl1, András Miklós, Peter Hess
1Institute of Physical Chemistry, University of Heidelberg, Im Neuenheimer Feld 253, D-69120 Heidelberg, Germany.
Abstract:
Sensitive photoacoustic detection of ammonia with near-infrared diode lasers (1.53 microns) and a novel differential acoustic resonator is described; a sensitivity of 0.2 parts per million volume (signal-to-noise ratio = 1) is attained. To eliminate adsorption-desorption processes of the polar NH3 molecules, a relatively high gas flow of 300 SCCM was used for the ammonia-nitrogen mixture. The results are compared with recent ammonia measurements with a NIR diode and absorption spectroscopy used for detection and photoacoustic experiments performed with an infrared quantum-cascade laser. The performance of the much simpler and more compact setup introduced here was comparable with these previous state-of-the-art measurements.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Atomic Absorption Spectroscopy: Overview
When irradiated by EMR of a particular wavelength, these...
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...
Atomic Absorption Spectroscopy: Radiation and Light Sources
Two common narrow-range 'line' sources used in AAS are hollow-cathode lamps (HCLs) and...
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
Atomic Fluorescence Spectroscopy

