The study of modified calcium hydroxides with surfactants for acid gas removal during incineration

The primary objective of the present work is to use additives to extend the sulfation reaction of the calcium hydroxide (Ca(OH)2) used to control SO2 emission from incineration processes. There are two reasons for adding surfactants (surface-active agent): (1) to provide an appropriate dispersion of the Ca(OH)2', thus preventing particle agglomeration due to humidity; (2) to alter the sulfation reaction environment by adsorbing heterogeneous materials on the surface of the Ca(OH)2 to extend the adsorption equilibrium. A dry scrubber integrated with a fabric filter was employed to study the effect of surfactants on the removal efficiency of acid gas in the flue gas with Ca(OH)2 as the sorbent. The operating parameters evaluated include: (1) the different surfactants (calcium lignosulfonate, sodium lignosulfonate, alkyl naphthalene sodium sulfonate and beta-naphthalene sodium sulfonate condensates) and (2) the composition of acid gas (i.e. sulfur dioxide (SO2), nitrogen oxide (NO) and hydrogen chloride (HCl)). The results show that modified Ca(OH)2 with surfactants could effectively decrease the emission of acid gas during incineration. Different additives had individual absorption efficiencies on different acid gases. On the whole, sodium lignosulfonate and beta-naphthalene sodium sulfonate condensates had better sorption capacity for SO2 and NO, but not for HCl. In addition, when SO2 coexisted with NO and HCl, the concentration of NO and HCl will result in decrease or increase of the removal efficiency of SO2.