Related Experiment Video
Updated: Jul 6, 2026

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors
Published on: November 7, 2016
A pi-stacking terthiophene-based quinodimethane is an n-channel conductor in a thin film transistor
Ted M Pappenfus1, Reid J Chesterfield, C Daniel Frisbie
1Department of Chemistry, University of Minnesota, Minneapolis, Minnesota 55455, USA.
Abstract:
A terthiophene-based quinodimethane, 3',4'-dibutyl-5,5' '-bis(dicyanomethylene)-5,5' '-dihydro-2,2':5',2' '-terthiophene (1) was synthesized and crystallized. Compound 1 has a planar quinoid geometry that is stabilized by dicyanomethylene groups at each end of the molecule. In the crystal each molecule is part of a dimerized face-to-face pi-stack, with intermolecular spacings of 3.47 and 3.63 A, respectively. Cyclic voltammetry showed that 1 could be reversibly reduced and oxidized in methylene chloride solution. Thin film transistors (TFTs) were prepared by vacuum evaporation of 1 onto SiO2(300 nm)/Si substrates, followed by evaporation of Ag source and drain contacts. The doped Si substrate served as the gate electrode. X-ray diffraction and atomic force microscopy indicate the films are polycrystalline, with the long axes of the molecules approximately perpendicular to the substrate. The TFT measurements revealed n-channel conduction in films of 1, with room-temperature electron field effect mobilities as high as 0.005 cm2/Vs. The butyl side chains give 1 appreciable solubility in a range of common solvents, and preliminary TFT results on films cast from chlorobenzene show electron mobility as high as 0.002 cm2/Vs. These results indicate that pi-stacked quinoidal thiophene oligomers are a promising new class of soluble n-channel organic semiconductors.
Related Concept Videos
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability. Many...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Types of Semiconductors
P-N junction
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
Schottky Barrier Diode

