Measured variation in boron loads reaching European sewage treatment works

Per capita boron loads reaching 48 sewage treatment works (STWs) in The Netherlands, Germany, Italy, and the UK have been determined from monitoring data. These have been compared with the per capita input predicted from boron in detergents, as determined from detergent product sales data. The resulting distribution of the ratios of measured boron to boron predicted from consumer usage has a 90th percentile of less than 1.5. Boron has previously been shown to be a good marker for substances contained in detergent products, as it cannot be biodegraded and is not substantially adsorbed in the sewer, and there is little or no removal during sewage treatment processes. The monitoring information on the distribution of boron loads found at the different STWs should thus be indicative of the distribution of other substances released to the environment by detergent products, as specified by the relevant industrial category (IC 5-personal/domestic) in the Technical Guidance Documents. Variation in detergent product consumption figures from 18 European countries is also low, with the country with the highest per capita detergent consumption having only 1.3 times the European average detergent use. Thus the present practice of determining a "reasonable worst case" by multiplying the average per capita consumption by a factor of four to account for geographic differences in distribution, is considered to be inappropriate. This should be replaced by a factor of less than two, which combines within country and between country variations to provide a reasonable worst case approximation of the load reaching the sewage treatment facility.